This is a low cost extending campervan bed and stowage compartment in one. 1800mm long x 775mm stowed (1300mm extended) x 410mm tall and 330mm wheelarch clearance.
Our 1800mm sliding campervan bed features two lift up sections to access the storage space under the bed. These are retained in an upright position with lid stays so you don't have to hold it up whilst using the space. This bed is also available in 1900mm length.
The unit is constructed using 15mm Moisture resistant MDF. It features 2 doors mounted with GTV concealed hinges and secured with push button mini latches (supplied).
The doors and their apertures can be routered to suit the fitting of edge trim - which will be supplied if this option is chosen.
Supplied flat packed with light grey vanity blocks which come with their own covers and support 4off 4 x 15mm screws which screw into 5mm threaded dowels embedded into the wood to ensure the joints are as strong as possible whilst still easy to assemble. Note: Insert/hinge and latch holes are all pre-drilled. Assembly time is approximately 2-3 hours.
The unit assembles as two parts which can be screwed together or left separate if you plan on lifting them in and out regularly.
Approximate weight: 60kg